Underground Geotechnical Engineer supporting ground control and mine planning at Coeur Silvertip, a Canadian precious - metals mining operation. Designing support systems, analyzing monitoring data, and managing geotechnical risk for underground excavations.
About the role
- Mid-level RF engineer supporting technical management, production readiness of an UT Modem/RF module for Telesat's LEO network. Involves significant hands-on work and cross-functional collaboration.
Responsibilities
- Serve as a technical owner for an RF module supporting DVB‑S/S2/S2X and/or DVB‑RCS2 operation in a LEO satellite network.
- Support RF architecture definition and performance budgets (gain, noise figure, linearity, phase noise, spurious emissions).
- Ensure RF performance compliance across process, voltage, temperature, aging, and environmental corners.
- Support system‑level trade studies and impact assessments when requirements or operating conditions evolve.
- Review and approve RF schematics and PCB layouts produced by internal or external design teams.
- Ensure adherence to best practices for RF grounding and isolation, EMI/EMC mitigation, shielding and thermal management, mixed‑signal partitioning.
- Participate in formal design and readiness reviews (PDR, CDR, MRR), identifying technical risks and proposing mitigation strategies.
- Act as the engineering interface to contract manufacturers (CMs), ODMs, and key suppliers.
- Lead or support DFM/DFT/DFS reviews, with focus on yield, repeatability, and long‑term producibility.
- Define and maintain manufacturing test strategies, acceptance criteria, golden units and correlation plans.
- Support EVT/DVT/PVT builds and production ramp‑up.
- Analyze production data (yield, fallout, trends) and drive root‑cause analysis and corrective actions.
- Own or support ECO/ECR processes, ensuring controlled and traceable changes throughout the product lifecycle.
- Develop, review, and maintain RF, functional, and system‑level test procedures.
- Support validation and production testing including: EVM / MER, ACLR, phase noise, harmonics and spurious emissions, DVB waveform compliance.
- Work closely with system and test teams to ensure requirements traceability and verification completeness.
- Support environmental, thermal, and reliability testing aligned with high‑reliability or aerospace practices.
- Support embedded control architectures used to configure and monitor RF hardware.
- Review and support interfaces such as SPI, I²C, and UART.
- Collaborate with firmware teams on board bring‑up, calibration and compensation routines, telemetry, health monitoring, and diagnostics.
- Ensure embedded control supports both manufacturing test and in‑service operation.
- Provide ongoing engineering support for deployed hardware, including field issues, performance anomalies, failure analysis and returns.
- Manage component lifecycle risks, including obsolescence and second‑source qualification.
- Maintain configuration control, technical documentation, and manufacturing records in PLM systems.
Requirements
- B.Sc. in Electrical Engineering or related discipline (M.Sc. preferred).
- 3–6 years of experience supporting RF hardware in production or operational environments.
- Strong understanding of RF components and subsystems (LNAs, mixers, PLLs, PAs, filters).
- Experience reviewing RF schematics and PCB layouts, rather than performing layout work.
- Familiarity with DVB physical‑layer concepts and performance metrics.
- Hands‑on experience supporting test development and automation (e.g., Python/SCPI, LabVIEW).
- Demonstrated experience working with manufacturing partners and supporting production issues.
- Strong documentation, change management, and cross‑team communication skills.
Benefits
- This position will be based out of the Ottawa, ON office
- Full-time office or hybrid 4 days office/1 day remote, subject to work needs
- Working conditions are generally comfortable typical of an office environment.
- Combination of lab, manufacturing, and office work.
- On‑site presence required for debug, FA, and production support activities.
- Occasional travel to manufacturing and UT development partners and test facilities (≈10–15%).
- Candidate must be able to obtain relevant security clearance for Canada
Job title
Job type
Experience level
Salary
Not specified
Degree requirement
Tech skills
Location requirements
Report this job
Found something wrong with the page? Please let us know by submitting a report below.
LP
Project Engineer / Coordinator, Water-Sewer Programming
LinkedIn Recruiter Post
The City of Regina is hiring a Project Engineer/Coordinator for Water - Sewer Programming. Ideal for those with experience in municipal infrastructure, water/wastewater, engineering, or project management.
Validation Engineer testing SSD firmware, NVMe features, and NAND memory products for DATAmundi’s localization and data - services software business. Detecting defects, optimizing validation, and coordinating with firmware engineers and clients.
Electrical Engineer - in - Training designing substation protection, control, and metering systems for Qualus, a power infrastructure transformation firm. Supporting utility projects from concept through construction and commissioning.
Project Engineer improving yield, efficiency, and raw - material utilization in Agropur’s dairy manufacturing operations. Leading process optimization and capital projects at the Granby facility.
Compiler Engineer advancing Intel’s oneAPI offloading and SYCL infrastructure for CPUs, GPUs, and accelerators. Collaborating with LLVM and Intel teams on production compiler technology.
Product Designer applying environmental engineering expertise to C - MORE’s enterprise risk and compliance data products. Designing usable workflows and interfaces for complex environmental risk intelligence.
Staff engineer managing novel vulnerability disclosure and CVE coordination for Chainguard, which secures open - source software supply chains. Leading industry collaboration on AI - driven software security standards, embargoes, and response processes.
Technical Proposal Specialist/Engineer developing medium - voltage switchgear quotes, layouts, pricing, and designs for S&C Electric’s power - grid solutions. Liaising with sales, customers, engineering, and production in hybrid Toronto role.
LP
UX/UI Front-End Engineer
LinkedIn Recruiter Post
Hiring a UX/UI Front - End Engineer for a 6 - 12 month contract in Toronto, ON. Must have React, TypeScript, and design systems experience.